Table of Contents
Advertisement
16
16
Key 3 – Mirroring
from the camera arm, towards you.
When the image is flipped horizontally and a long press
on Key 3 is performed, the image will be flipped
vertically in addition. Consequently, you will obtain a
presentation of a mirror.
Key 4 - Overview / Focus
Overview
magnifications.
In Overview mode, the following settings will be
activated:
Minimum zoom
True colour
Lines and curtains are deactivated
Cross-hair is shown
The cross-hair points at the area by minimum zoom
which has been magnified at last.
Perform a short press on Key 3 to flip the image
horizontally. This is required for the use as a board
camera when you turn the camera head away
Perform a short press on key 4 to activate the
overview mode. This is very useful when you have
lost orientation in your document because of high
Control Panel
Advertisement
Table of Contents
