Key 2 - Lines And Curtains - Papenmeier VISULEX Maki User Manual

14
14
Key 2 – Lines and Curtains
Perform a short press on Key 2 and activate or
deactivate the lines or curtains.
When the lines or curtains are activated and a long press
on key 2 is performed, the lines and curtains can be
configured in four steps.
Step one:
First, you can select the type of lines or curtains therefor
turn the rotary knob to the right or to the left. You can
choose between the following line or curtain types:
 Horizontal lines
 Horizontal curtains
 Vertical lines
 Vertical curtains
By pressing on the rotary knob the line or curtain type
will confirmed. This will lead you to the next step.
Step two:
In this step, the first line or the first curtain will be
positioned by means of the rotary knob according to the
selected line or curtain type.
If the line should approach the other line to closely, the
other line will be moved accordingly. The same applies
to the curtains.
By pressing on the rotary knob the position will
confirmed. This will lead you to the next step.
Control Panel