Table of Contents
Advertisement
12
12
By means of the rotary knob the values are changed as
follows:
To increase a value, turn the rotary knob to the
right.
To decrease a value, turn the rotary knob to the left.
The changes will be visible immediately.
Note: The changed values have to be confirmed by
pressing on the rotary knob.
The process will be cancelled if no value has been
changed or confirmed during 15 seconds. Furthermore
the process will be cancelled by pressing any key. Thus,
the old values will be restored.
Optionally, you can hear three signal sounds which are
deactivated by default.
Zoom
When the default function is activated, the zoom can be
set by means of the rotary knob.
To increase the zoom level, please turn the rotary
knob to the right.
To decrease the zoom level, please turn the rotary
knob to the left.
Control Panel
Advertisement
Table of Contents
