Panasonic KX-TDA15 Installation Manual page 24

1.4 Specifications
If the total load figure exceeds 32, it cannot be supported by the KX-TDA15. In this case, use
the KX-TDA30 with Additional AC Adaptor. If the load figure exceeds 96, use the KX-TDA100
with M-Type Power Supply Unit (PSU-M), or the KX-TDA200 with either PSU-M or L-Type
Power Supply Unit (PSU-L).
PT
Pre-installed 4 Super Hybrid Ports
Extension Card
CS (1 unit)
VPS (1 port)
ISDN Telephone
*1 Only an extension card that can supports SLTs counts for the load figures.
*2
If the connected ISDN telephone has an external power source, its load figure is 0.
24 Installation Manual
Equipment Type
KX-T7600 series DPT/DSS console
KX-T7560/KX-T7565 DPT
Other DPT/DSS console
APT
*1 SLC8
Load Figure
0
0
4
4
0
0
4
0
1 *2