Panasonic KX-TDA15 Installation Manual page 136

3.3 Installation of the KX-TDA15 Maintenance Console
File Transfer PC to PBX (SD Card)
File Transfer PBX (SD Card) to PC
SD Card File View and Load
SD Card File Delete
Message File Transfer PC to PBX
Message File Transfer PBX to PC
Error Log
ISDN/Qsig Protocol Trace
CS Information
PS Information
System Reset
Reset by the Command
136 Installation Manual
The programme files in the PC are transferred to
SD Memory Card of the Hybrid IP-PBX.
Programme files in the SD Memory Card is
overwritten in this process.
The programme files in the SD Memory Card are
transferred to the PC.
The name, date, time, and size of programme
files in the SD Memory Card are viewed, then
these files are transferred to each CS connected
to the Hybrid IP-PBX.
The programme files in the SD Memory Card are
deleted.
The message files for Outgoing Messages in the
PC are transferred to all MSG cards. Available
only when at least 1 MSG card is installed.
The message files for Outgoing Messages in the
MSG cards are transferred to the PC. Available
only when at least 1 MSG card is installed.
The error log is displayed (for details, refer to
"4.1.5 Troubleshooting by Error Log").
Displays ISDN protocol trace data of the BRI
card.
Displays the internal information of the CS.
Displays the registration information of the PS.
Resets the connected Hybrid IP-PBX. (It is the
same as pushing the Reset Button with the
System Initialise Switch in the "NORMAL"
position.) After using this command, you have to
restart the KX-TDA15 Maintenance Console and
connect to the Hybrid IP-PBX again.