Panasonic KX-TDA15 Installation Manual page 130

3.3 Installation of the KX-TDA15 Maintenance Console
Installing the KX-TDA15 Maintenance Console and Selecting
Appropriate Country/Area Data
Notes
• To install or uninstall the software into Windows 2000 Professional or Windows XP
Professional, the user must be grouped either of "Administrators" or "Power Users".
• To connect the PC to the Hybrid IP-PBX via USB, the KX-TDA USB driver must have
been installed. Follow the instructions of the wizard to install the KX-TDA USB driver.
Starting the KX-TDA15 Maintenance Console and Assigning the
Basic Items (Quick Setup)
When you start the KX-TDA15 Maintenance Console with the Installer Level Programmer
Code and connect to the Hybrid IP-PBX for the first time after initialisation (with the factory
default setting), Quick Setup will launch automatically. During Quick Setup, you will setup the
following basic items:
• Date and Time of the Hybrid IP-PBX. The date and time set on the PC will be used.
• System Password for installer for PC programming.
• Operator extension numbers. Operator extensions for all time modes (day/lunch/
break/night) can be assigned.
• Flexible Numbering type to pattern 1 or pattern 2. If pattern 1 (with
must prefix all feature numbers (except access numbers) when an extension user
wants to use a feature.
• Operator call and Idle Line Access/ARS numbers (0 or 9). The feature numbers for
operator call and Idle Line Access/ARS can be selected.
• Remote Maintenance Dial Number. Enter the complete telephone number of the PBX
(including the country code). When necessary, this number will be used to access the
PBX from a remote location for maintenance purposes.
130 Installation Manual
1. a.
Save the setup file of the KX-TDA15
Maintenance Console on your PC.
b.
Double-click the icon to execute the
setup file.
c.
Follow the instructions of the wizard.
2. a.
Type the appropriate Country Code.
The KX-TDA15 Maintenance Console
will be installed with the appropriate
default data for your country/area.
b.
Click [Next].
c.
Follow the instructions of the wizard.
d.
Click [Finish].
e.
Click [OK].
) is selected, " "