Table of Contents
Advertisement
Quick Links
Roller shutter drive VariEco L RH
Contents
Operating and assembly
1
instructions
2
General information on these instructions
2.1
Standards and guidelines
2.2
2.3
2.4
2.5
3
3.1
3.2
4
4.1
4.2
5
5.1
5.2
5.3
VariEco L RH 230 V / 50 Hz
5.4
6
7
8
9
10
11
12
12.1
Roller shutter drive VariEco L RH
1
Operating and assembly instructions
1
Follow these instructions for safe and proper use. Observe all
assembly instructions since incorrect assembly can lead to
1
serious injuries. Keep the instructions for future reference.
1
The German operating instructions are the
original version.
1
All documents in other languages are translations of the
2
original version.
All rights reserved in the case of patent, utility model or
2
design registrations.
2
General information on these
instructions
2
The content structure is based on the life cycles of the
2
electric motor drive (hereinafter referred to as "the product").
2
The manufacturer reserves the right to make changes to
the technical data in these operating instructions. In some
3
cases, this technical data may differ from those of the
respective product version; however, the functional informa-
3
tion will not undergo significant changes or become invalid.
The current version of the technical specifications may be
3
requested from the manufacturer at any time. No claims
may be asserted against the manufacturer as a result of this
3
provision. Deviations from textual or visual statements may
occur depending on the product's technical development,
4
features and accessories. Deviating information for special
versions will be provided by the manufacturer in the sales
4
documentation. Other information shall remain unaffected
by these provisions.
5
2.1
Standards and guidelines
During construction, the fundamental health and safety
5
requirements were applied and provision was made for the
appropriate legislation, standards, directives and guidelines.
5
The safety of the product is confirmed by the declaration
5
of conformity (see EC Declaration of Conformity). All in-
formation relating to safety in these operating instructions
5
refers to the laws and regulations that are currently valid
in Germany. All information in these operating instructions
6
must be complied with at all times and without limitation. In
addition to the safety notes in these operating instructions,
6
the regulations on accident prevention, environmental
protection and occupational health and safety applicable at
6
the location of use must be observed and adhered to. The
regulations and standards for safety assessment can be
6
found in the EC Declaration of Conformity.
2.2
Intended use
6
The product is intended for use in facade constructions as a
6
drive for electrically powered sun protection fittings.
6
The elero drive calculation program
http://elero.de/drive-calculation/
7
is vital for defining the drive.
Other applications must be agreed upon in advance
with the manufacturer, elero GmbH Antriebstechnik
(see "Address").
The plant operator shall be solely responsible for any
damages arising from the improper use of this product.
The manufacturer cannot be held liable for personal or
material damages caused by misuse or procedural
errors, nor by improper operation or commissioning.
138207201_EN_0319
Advertisement
Table of Contents
Related Manuals for elero VariEco L RH
Summary of Contents for elero VariEco L RH
-
Page 1: Table Of Contents
Electrical connection documentation. Other information shall remain unaffected by these provisions. Connection example VariEco L RH 230 V / 50 Hz Standards and guidelines During construction, the fundamental health and safety Adjustment of the end positions requirements were applied and provision was made for the appropriate legislation, standards, directives and guidelines. -
Page 2: Intended Use
Customer Service can be found in the Section "Address". The table below defines the representation and description If you did not purchase the product directly from elero, of situations used in these operating instructions for situa- please contact the supplier of the product. -
Page 3: Product Description
►Always have electrical work carried out by an Product description authorised electrician. Risk of injury due to electric current. The VariEco L RH mm is an electromechanical tubular mo- tor drive. During operation it executes radial movements. Possible danger due to parts that are faulty becoming energised. -
Page 4: Mechanical Fastening
For optimum coordination of drive and blind after assembly mounted on the shaft using the suitable motor bearings and of the VariEco L RH, adjust the end positions on the drive. adapter components according to building requirements and, depending on the type of blind, with suitable connec- Mechanical fastening tion elements, also provided by the system supplier. -
Page 5: Connection Example
Bottom end position: white setting screw orange setting screw Fig. 4 Diagram VariEco L RH 230 V / 50 Hz Fig. 5 Adjustment of the end positions Check for functioning: If necessary, change or swap the 5.4.1 Upper end position assignment of the direction buttons for the operating ►Allow the drive (without blind) to run fully in DOWN/... -
Page 6: Troubleshooting
After unpacking, dispose of the packaging in accordance The following variants are available: with the valid regulations. • VariEco L RH drive with round head (standard) Dispose of the product in accordance with the relevant regulations when you no longer need it. - Page 7 Technical data and dimensions: VariEco L RH 12.1 VariEco L RH Size / Type VariEco VariEco VariEco L40 RH L60 RH L80 RH Rated voltage [V] 1 ~ 230 1 ~ 230 1 ~ 230 Rated torque [Nm] Rated speed (rpm) Rated current [A] 1.50...
- Page 8 GmbH Maybachstr. 30 info@elero.de We reserve the right to make technical changes Drive technology 73278 Schlierbach, Germany www.elero.com...