User Manual
SB-DN-1ip
6. Select "Communication mode(C)III", in the pop up window below select "P2P" and fill
in the "Group Name", "Project Name", "User", "Password". The "IP" is the public IP of
Router R1, the "Port" is the one set in Router 1, the UDP 6000.
7. Click "Apply", this pop up window will disappear when you connect to the remote
SB-DN-1IP successfully, then you can search for devices and configure them as usual.
3.2.3 Remote Server mode
This mode is suitable for both travelling programmer and end user to configure and control
HDL-BUS system via Internet. Since a server is getting involved in this mode, no static
H D L t y p i c a l g a t e w a y – U s e r M a n u a l
1 2