P2P Mode - HDL SB-DN-1IP User Manual

User Manual
SB-DN-1ip

3.2.2 P2P mode

In this mode, you are able to access the HDL-BUS system directly through Internet, using
HDL-BUS Pro software.
This mode requires fixed static public IP for both ends, so this mode is suitable for
installation company to configure the HDL-BUS system remotely, but not suitable for
commuting end user to control the HDL-BUS system in their home from, e.g., their IPad,
because the IPad will have different public IP when end user is in office, bus,
subway/metro, homeI
PS: For Installation Company, this mode is more secure than Remote Server mode, since
no server saves your password and the SB-DN-1IP only transfers the data to the
installation company, so even somebody knows the password, it is useless.
Schematic diagram:
Configuration steps:
1. Change the default IP and IP MAC, to avoid possible conflict.
Default IP: 192.168.10.250, Default IP MAC: H-D-L-85-85-85
H D L t y p i c a l g a t e w a y – U s e r M a n u a l
9