At+Cgnspwr Gnss Power Control; At+Cgnsinf Gnss Navigation Information Parsed From Nmea Sentences - SimCom SIM7060 Series Application Note

AT+CGNSRST GNSS Reset Mode
AT+CGNSTST Send data received from GNSS to AT UART

3.1 AT+CGNSPWR GNSS Power Control

AT+CGNSPWR GNSS Power Control
Test Command Response
AT+CGNSPWR=? +CGNSPWR: (list of supported <mode>s)
OK
Parameters
See Write Command
Read Command Response
AT+CGNSPWR?
TA returns the current status of GNSS Power supply
+CGNSPWR: <mode>
OK
Parameters
See Write Command
Write Command Response
AT+CGNSPWR=<m OK
ode> or
ERROR
Parameters
<mode>
Reference
3.2 AT+CGNSINF GNSS Navigation Information Parsed
from NMEA Sentences

AT+CGNSINF GNSS Navigation Information Parsed from NMEA Sentences

Execution Response
Command
+CGNSINF:
AT+CGNSINF Time>,<Latitude>,<Longitude>,<MSL
Ground>,<Course
Mode>,<Reserved1>,<HDOP>,<PDOP>,<VDOP>,<Reserved2>,<GNSS
SIM7060 Series_GNSS_Application Note
0 Turn off GNSS power supply
1 Turn on GNSS power supply
<GNSS run status>,<Fix
Simplify Communication
>,<UTC
status
Altitude>,<Speed
Over Ground>,<Fix
Page 5 / 11
date &
Over