Advertisement
Available languages
Available languages
;
Before using this equipment, record the product identification information from the ID label in the 'Inspection and
Maintenance Log' at the back of this manual.
DESCRIPTION:
Figure 2 identifies key components of the 3M™ DBI-SALA® Nano-Lok Edge Self-Retracting Devices (SRD). Nano-Lok Edge SRDs
are drum wound Lifelines (J) that retract into a Nylon Housing (H). Nano Lok Edge SRDs include an integral Energy Absorber (I).
A Harness Interface (G) allows attachment to a Full Body Harness and Hook and Loop Straps (K) stabilize the Energy Absorber
to the Full Body Harness. (M) represents WrapBack webbing on the WrapBack models. Figure 1 identifies available Nano-Lok
Edge models and their Connector (L) configurations. See Table 1 for Nano-Lok Edge SRD and connector specifications.
The standard SRL-LEs contain 2.1-2.4 m (7-8 ft) long galvanized wire rope lifelines of which 1.82 m (6 ft) retracts within the
SRL-LE housing. WrapBack SRL-LEs contain 1.8 m (6 ft) long galvanized wire rope lifelines which retract within the SRL-LE
housing. WrapBack SRL-LEs have an additional .91 m (3 ft) long web section that is used to attach to an anchorage.
Component Specifications:
SRL Housings
Drum
Internal Components
Lifeline
Energy Absorber
Swivel
Harness Connector
Fasteners
Locking Pawls
Main Shaft
Motor Springs
Wrapback Web
Connector Specifications:
Description
Snap Hook
1
Snap Hook
2
Rebar Hook
3
Carabiner
4
Snap Hook
5
Rebar Hook
6
Rebar Hook
7
Snap Hook Tie Back
8
Rebar Hook
9
Comfort Grip Snap Hook
10
Lifeline Tensile Strength:
Represents straight line Nano-Lok Edge connection.
Represents wrapped Nano-Lok Edge WrapBack connection.
Represents straight line Nano-Lok Edge WrapBack connection.
Table 1 – Specifications
Super Tough Nylon, UV Resistant
Aluminum Alloy
Stainless Steel, Alloy Steel
Lifeline: 3/16" 7 x 19 Galvanized Cable
Cover: Polyester and Nylon Fabric, Web: Vectran/Polyester, Stitching: Nylon Thread
Zinc Plated Steel
Aluminum Alloy Frame and Stainless Steel Locking Pin
Zinc Plated Alloy Steel Screws; Stainless Steel Rivets
Stainless Steel
Stainless Steel
Stainless Steel
Kevlar/Dyneema
Model Number
Material
9502116
Steel
9502195
Steel
2000210
Steel
2000023
Aluminum
9505254
Aluminum
2000209
Aluminum
2109193
Steel
9501804
Steel
9502058
Steel
2000214
Aluminum & Steel
9501479 - 3/16 in. dia. Galvanized Steel - Min. Tensile Strength 4,200 lb (18.7 kN)
9508556 - 1 1/4 in. Web, Dyneema/Kevlar, Black, Min. Tensile Strength 9,500 lb (42.2 kN)
Gate Opening
19 mm (3/4 in)
16 kN (3,600 lbs)
19 mm (3/4 in)
16 kN (3,600 lbs)
63 mm (2-1/2 in)
16 kN (3,600 lbs)
19 mm (3/4 in)
16 kN (3,600 lbs)
19 mm (3/4 in)
16 kN (3,600 lbs)
63 mm (2-1/2 in)
16 kN (3,600 lbs)
64 mm (2-1/2 in)
16 kN (3,600 lbs)
19 mm (3/4 in)
22.2 kN (5,000 lbs)
57 mm (2-1/4 in)
16 kN (3,600 lbs)
64 mm (2-1/2 in)
16 kN (3,600 lbs)
16
Gate Strength
Tensile Strength
22.2 kN (5,000 lbs)
22.2 kN (5,000 lbs)
22.2 kN (5,000 lbs)
22.2 kN (5,000 lbs)
22.2 kN (5,000 lbs)
22.2 kN (5,000 lbs)
22.2 kN (5,000 lbs)
22.2 kN (5,000 lbs)
22.2 kN (5,000 lbs)
22.2 kN (5,000 lbs)
Advertisement
