Midea CHEST FREEZER Series Service Manual page 24

Service Manual_2018-V2.0
9）Replace the compressorand welding the compressor
pipeline.-❿Welding the process pipeline.-⓫Welding the
low-pressure muffler.-⓬Welding the high-pressure
exhaust pipe.
10）Replace the filter, Cu-Fe tubes welding ⓭ used Ag
welding rod, Cu-Cu tubes welding ⓮ used Cu welding
rod.
11）Vacuum system,The degree of vacuum below 6Pa.
12）Perfusion refrigerant.
13）Use the vise grip pliers clamp the middle of the
process pipe, then seal welding process tube⓯⓰.
Piping system in the compressor case
❶ Capacitor ❿ Compressor
24