Light System; Compressor Case - Midea CHEST FREEZER Series Service Manual

8.3 Light system

Door lamp
Door lamp disassembly
1) Open the refrigerator door to dismantle the lamp cover;
Note: There are two kinds of door lamps, namely,
incandescent lamp and LED lamp, and what is shown in
the picture is the incandescent lamp.
2) Screw off the screws to remove the incandescent lamp
holder or LED lamp panel; Note: The incandescent lamp
is shown in the left picture, and the LED lamp is shown in
the right picture, which is mounted on the mounting panel.
3) Screw the lamp off the holder (or remove the LED lamp
panel).
Pilot light
Pilot light

8.4 Compressor case

shutter
Pull down the screw, open the shutter.
Compressor and the cooling system pipe
Service Manual_2018-V2.0
POWER+RUN
21