MG MGA Twin Cam Workshop Manual page 31

3,000 miles (4800 km.) service
1. Engine
Top up carburetter piston dashpots.
Lubricate carburetter controls.
Top up radiator header tank.
Check dynamo drive belt tension.
Clean and re-oil air cleaner elements.
2. Ignition
Check automatic ignition control, lubricating distributor drive shaft and cam and advance mechanism.
Check distributor contact points, and adjust if necessary. Clean and adjust sparking plugs.
3. Clutch
Check level of fluid in the hydraulic clutch master cylinder.
4. Brakes
Make visual inspection of brake lines and pipes.
Check level of fluid in the hydraulic brake master cylinder.
5. Hydraulic dampers
Examine all hydraulic dampers for leaks.
6. Body
Lubricate door hinges, bonnet lock, and operating
mechanism.
7. Electrical
Check battery cell specific gravity readings and top up to correct level.
8. Lubrication
Change engine oil.
Top up gearbox and rear axle oil levels.
Lubricate all nipples (except steering rack and pinion and water pump).
9. Wheels and tyres
Check tyre pressures.
Change road wheels round diagonally, including spare, to regularize tyre wear.
31
©2018 morrisgarages.ch