Flexible Hoses - MG MGA Twin Cam Workshop Manual

Replace the brake unit as detailed in Section M.10.
M.18 FLEXIBLE HOSES
The flexible pipes must show no signs of deterioration or damage and the bores should be cleared
with a jet of compressed air. No attempt should be made to clear a blockage by probing as this may
result in damage to the lining and serious restriction to fluid flow. Partially or totally blocked flexible
pipes should always be renewed. When removing or refitting a flexible pipe the end sleeve hexagon
should be held with the appropriate spanner to prevent the pipe from twisting. A twisted pipe will prove
detrimental to efficient brake operation
Fig. M.9 The arrow indicates the brass adjuster nut fitted to the cable relay lever
191
©2018 morrisgarages.ch