Fitting An Adjustable Steering Column; Service Tools - MG MGA Twin Cam Workshop Manual

J.11 FITTING AN ADJUSTABLE STEERING COLUMN
Remove the steering wheel as detailed in Section J.1.
Remove the steering column assembly as detailed in Section J.2.
Fit the steering column to the car and tighten the clamp bolts.
Fit the steering wheel, locating it on the splines to bring the centre-line of the spokes horizontal when
the road wheels are in the straight-ahead position.

SERVICE TOOLS

18G310. Steering Wheel Remover
This extractor has been specially designed to remove the steering wheel without damage.
18G312. Steering Tie-rod Pin Spanner
This tool is designed for use with the C-spanner 18G313 for dismantling the steering tic-rod ball
housing. In use it is clamped in a vice and the pins of the spanner are engaged with the holes in the
housing. Use the spanner 184313 to unscrew the housing cap.
18G313. Steering Tie-rod C-Spanner
Designed to engage the shallow splines of the steering rack ball housing cap and remove it without
damage.
166
©2018 morrisgarages.ch