Unitech MS926P Quick Start Manual

Scan Dongle
Scan the barcode on the USB Dongle.

MS926 TIPS

●The MS926P should be recognized as a generic HID device by your host device, similar to a standard keyboard. This allows you to scan
into any field you could normally type into.
●If the MS926P is out of RF transmitting range from the host device, it will automatically save any scan data in its buffer memory and
automatically upload the scan data to the host when back in RF transmitting range.
●The MS926P can also operate in Batch Mode, where a RF transmitting connection is not required. In Batch Mode, the MS926P saves all
scan data in internal memory and then uploads the data when connected to a host. See back page of this guide for more information about
modes and settings.
Scanner Type
Operation Mode
Wedge
Data & Memory
【Batch】
1. Scan to switch from Auto Mode to Batch Mode. Data will now be stored in the internal memory of the MS926P and the
MS926P will no longer transmit data via RF.
【Send Batch】
2. Scan
3. Scan 【Auto】 to switch back to Auto Mode. You can now pair the MS926P with a host.
Default Option
*
hank you for purchasing the unitech product.
T
For other product documentation, please scan the QR code for more information.

Charging

Plug the USB cable into the port on the scanner and into a USB port
on the host computer.

Connect Dongle To Host

Plug the USB Dongle to a free USB port of
a host computer.
The MS926P is now ready to use.
*
RF HID
Batch
→
to send data from the MS926P to your host device after collecting the data in Batch Mode.
MS926P
Host
USB
RF SPP
Batch
Send Batch
Wireless 2D Pocket Scanner
Quick Start Guide
Scanner
Micro USB
Test & Finish
Open a word processing program such
as Microsoft Word or Notepad and scan
the following barcode:
If the word "unitech" appears on the
screen you have succesfully installed
your scanner.
USB SPP
*
Auto
*
Auto
→
Version 1.0
401414G