+/-
Press the
domestic hot water (
A00:
A01:
A02:
A03:
A04:
A05:
A06:
A07:
flame signal value (8-100%).
N.B.:
lines A08 and A09 are not used.
This function is active for 3 minutes. To interrupt the "INFO" function, press
N.B.:
The resetting operation is available only for 5 consecutive attempts, after which the gas boiler remains blocked.
To carry out a new RESET attempt, proceed as follows:
selecting "OFF" (as described in section
for about 2 seconds, the display shows
See section 9 for error codes and anomalies description.
For more detailed technical information, please consult the "SERVICE INSTRUCTIONS".
INSTRUCTIONS FOR FITTERS
) buttons to display the following instantaneous information:
19.3 FAULTS DISPLAY
"OFF
.
19.4 ADDITIONAL INFORMATION
49
.
7113868.01 - en