To light the boiler correctly, proceed as follows:
When the gas boiler is power supplied, the display shows the following information:
1.
2.
3.
4.
5. boiler and gas type (e.g.
The displayed letters mean the following:
= open chamber boiler
= NATURAL gas used
6.
7. Software version (two numbers x.x
(approx. 2 seconds) to set the boiler operating mode as described in section 3.2.
To display some useful information during the boiler operation proceed as follows:
Press
for approx. 6 seconds. When the function is enabled, the display shows "A00" (..."A07") alternating with
5 seconds
Figure 13
INSTRUCTIONS FOR FITTERS
19. INFORMATION ON DISPLAY
19.1 FIRST DISPLAYED INFORMATION
).
= LPG gas used.
19.2 OPERATION INFORMATION
48
7113868.01 - en