Information Display - Baxi Luna 3+ Operating And Installation Instructions

To correct light the boiler, proceed as follows:
• Provide power supply to the boiler.
When the gas boiler is power supplì, the display shows the following information:
1. all symbols alight;
2. manufacture information;
3. manufacture information;
4. manufacture information;
5. Type of boiler and gas used (eg.
The displayed letters mean the following:
= natural boiler chamber
= natural gas METANE
6. Hydraulic system;
7. Software version (two numbers x.x);
• open the gas cock;
• press the button, for at least two seconds, to set the operating boiler mode (see section 3.2).
To display some useful information during the boiler operation proceed as follows:
•
Press the button for at least 6 seconds until the display shows "A00" (..."A07") alternating with the respective
( )
value (e.g. figure 9);
5 seconds
Figure 9
INSTRUCTIONS PERTAINING TO THE INSTALLER

18. INFORMATION DISPLAY

18.1 FIRST DISPLAYED INFORMATION
).
= sealed boiler chamber
= LPG gas
18.2 OPERATION INFORMATION
40
7217395.01
- en