Morso 4000 Instructions For Installation And Use Manual page 17

Removing/installing vermiculite parts (brick panel, rear brick
and baffle plates). Vermiculite should only be removed/in-
stalled when the stove is cold
1. Start by emptying the cold stove of ash. Lift the diaphragm
and stand it edgeways
2. With one hand, lift the bottom baffle plate. With the other
hand, lift the brick panel up a few centimetres. This is best done
with a slotted screwdriver or similar. Once the brick has been
lifted, tip the diaphragm back into place, so the brick panel is
now released and can be lifted out.
3. Once the first brick panel has been removed from the
stove, the diaphragm can be lifted and removed.
4. Lift the bottom baffle plate again and tip the other brick
panel out.
5. Lift the bottom baffle plate free of the tertiary combus-
tion air box and remove it.
32
6. If necessary, the rear brick can now be removed.
7. Lift the top baffle plate free of the brackets and down
and back from the brackets to release it.
8. Re-installing vermiculite parts: as removal but in reverse
order.
Spare parts for the 4000-
Description
Door packing cord
Inner grate frame
Upper baffle
Bottom baffle
Glass window
Right/left side brick panel
Rear brick
Additional accessories
We offer a comprehensive line of chimney, floor plate and accessory products that can facilitate
the daily operation and maintenance of your Morsø stove.
4100
Product no.
57100700
57100400
57100000
57100100
57100500
57100200
57100300
33