Return Process For Battery-Operated Devices - Siemens SITRANS TF280 WirelessHART Operating Instructions Manual

Temperature transmitter
Table of Contents

Advertisement

9.3

Return process for battery-operated devices

Remove the battery unit before returning the device
Before returning the device, remove the battery unit. Battery units must not be returned.
Lithium thionyl chloride high-performance batteries belong to dangerous goods class 9:
Miscellaneous hazardous materials and substances. Read the accompanying safety data
sheet.
Return procedure
Attach the bill of lading, returned goods document and decontamination certificate in a firmly
affixed clear plastic pouch on the outside of the packaging.
Required forms
● Bill of lading
● Return document with the following information:
● Decontamination declaration
The form is available on the Internet.
SITRANS TF280 WirelessHART
Operating Instructions, 10/2010, A5E02619566-02
WARNING
– Product (item description)
– Number of returned devices/replacement parts
– Reason for returning the item(s)
With this declaration you warrant "that the device/replacement part has been carefully
cleaned and is free of residues. The device/replacement part does not pose a hazard for
humans and the environment."
If the returned device/replacement part has come into contact with poisonous, corrosive,
flammable or water-contaminating substances, you must thoroughly clean the
device/replacement part before returning it, in order to ensure that all hollow areas are
free of hazardous substances. Check the item after it has been cleaned.
Any devices/replacement parts which are returned without a decontamination declaration
will be cleaned at your cost before further processing.
9.3 Return process for battery-operated devices
Troubleshooting/FAQs
83

Advertisement

Table of Contents
loading

This manual is also suitable for:

Sitrans 7mp1110-0adSitrans 7mp1110-0ac

Table of Contents