Communication; 4.1 Wireless - Siemens SITRANS TF280 WirelessHART Operating Instructions Manual

Operation
5.6 Parameter descriptions
5.6.4

"4 Communication"

5.6.4.1

"4.1 Wireless"

"4.1.1 Network ID"
Factory setting:
Setting range:
Purpose:
Description:
"4.1.2 Network key"
Factory setting:
Setting range:
Purpose:
Description:
"4.1.3 Connect network"
Requirements:
Factory setting:
Setting range:
Purpose:
Description:
54
1229
00001 ... 65535

Assign network ID
Commissioning requirement. Password-protected function.
Corresponds to parameter "1.1 Network ID" (Page 44) .
-
32-digit, hexadecimal

Assign network key
Commissioning requirement. Password-protected function.
Corresponds to parameter "1.2 Network key" (Page 44) .
Wireless HART gateway is prepared.

All parameters required for commissioning are set.

See menu "1 Quick start" (Page 44)
-
START

Connect device to wireless HART network.
Start establishment of the connection by pressing the M key.
Establishment of the connection is displayed in the measured value view.
The supplementary message is deleted when the connection has been
established successfully.
Corresponds to parameter "1.6 Connect network" (Page 45) .
SITRANS TF280 WirelessHART
Operating Instructions, 10/2010, A5E02619566-02