Table of Contents
Advertisement
Connection mode "Connect"
The device attempts to establish a connection to the WirelessHART network. Trigger:
● Attempt to connect started via external devices:
● The device is started up.
● The attempt to connect is forced.
Connection mode "Connected"
The change to the measured value view signals that a connection to the WirelessHART
network exists.
SITRANS TF280 WirelessHART
Operating Instructions, 10/2010, A5E02619566-02
– HART modem
– Control system
Quick start: Menu "1.6 Connect network" (Page 45)
Connect network: Parameter "4.1.3 Connect network" (Page 54)
Operation
5.10 Connect/disconnect
65
Advertisement
Table of Contents
