Cleaning; Technical Specifications - Invacare ScanBed 755 User Manual

14. Cleaning

TM
The SB755 cannot withstand cleaning in washing machines nor flushing with a water jet.
Use ordinary disinfectioning detergents. Dry the bed after cleaning. Never use acids, alkalines
or solvents. Please make sure the power plug is removed from the socket outlet during
cleaning.
The backrest and the leg/thigh sections can be lifted from the mattress support, which facili-
tates cleaning and access to the control unit.
Important details for cleaning IP66 hand control, control unit and motors:
Always clean with water and brush. Water may be pressurised, but never use high-pressure
cleaning or steam cleaning directly on the electrical parts.

15. Technical specifications

80 cm
0° - 73°
All measurements are stated in cm. All angles are stated in degrees. All measurements and
angles are stated without tolerances, on a non-extended bed. The bed can be extended
respectively 5 and 10 cm´s in both ends. Invacare® reserves the right to change the stated
measurements and angles without warning.
Max. patient weight: 200 kg.
Transportation and storage conditions:
Temperature between -10° and 50°C
Humidity between 10 and 80 % RH
‡
Pressure between 700 and 1.100 hPa.
UM_1518190_GB_DK_SE_NO_FI_DE_NL_FR_IT_PT_ver06.indd 36
200 cm
26 cm 26 cm 68 cm
213 cm
0° - 28°
-10
14
36
85/90 cm
90/100 cm
0° - 16°
0° - 18°
14°
25°
700
50°C
10 80%
1.100 hPa
122°F
2011-11-08 15:25:38