Siemens 7XV5461-0B 00 Series Directions For Use Manual page 67

7XV5461-0Bx00
EMC Tests For Noise Emission (Type Test)
Standard:
– Radio Noise Voltage and Current
to Lines
IEC-CISPR 22
– Radio Noise Field Strength
IEC-CISPR 22
– Voltage fluctuations and flicker
on the mains power input at AC 250 V
IEC 61000–3–3
Mechanical Stress Tests
Vibration and Shock Stress During Operation
Standards:
– Vibration
IEC 60255-21-1, Class 2
IEC 60068-2-6
– Shock
IEC 60255-21-2, Class 1
IEC 60068-2-27
– Seismic Vibration
IEC 60255-21-3, Class 1
IEC 60068-3-3
C53000-B1174-C173-5
EN 61000-6-3 (Generic Standard)
150 kHz to 30 MHz
Limit Class B
30 MHz to 1000 MHz
Limit Class B
Limits are maintained
IEC 60255–21 and IEC 60068–2
Sinusoidal
10 Hz to 60 Hz: ±0.075 mm Amplitude
60 Hz to 150 Hz: 1 g acceleration
frequency sweep rate 1 Octave/min
20 cycles in 3 orthogonal axes.
Half-sine shaped
acceleration 5 g, duration 11 ms,
3 shocks in each direction of
3 orthogonal axes
Sinusoidal
1 Hz to 8 Hz ±3.5 mm Amplitude
(horizontal axis)
1 Hz to 8 Hz: ±1.5 mm Amplitude
(Vertical axis)
8 Hz to 35 Hz: 1 g acceleration
(horizontal axis)
8 Hz to 35 Hz: 0.5 g acceleration
(Vertical axis)
Frequency Sweep Rate 1 Octave/min
1 cycle in 3 orthogonal axes
English
67