Explosionsgeschützte Ex-d (e)
Steuereinheit, Verteilung;
aus Leichtmetall GHG 64
Inhalt
:
Inhalt .................................................... 2
1.2.1.1 Haupt-/Sicherheitsschalter 80 A .......... 5
1.2.1.2 Haupt-/Sicherheitsschalter 240 A ........ 5
1.2.1.3 Haupt-/Sicherheitsschalter 400 A ........ 6
1.2.2.4 Schlagtaster Ziehentriegelung ............. 7
1.2.3 Potentiometer ...................................... 8
Drehschschalter 20 A - 63 A ................. 9
1.2.5 Schlüsseldrehschschalter
1.2.5.1 Schaltdiagramm
Schlüsseldrehschschalter
2 Grundsätze ..........................................12
Deckelverschluss ................................15
10 Technischer Anhang .......................... 30
10.1.1 Anzugsdrehmomente der
Reihenklemme Phoenix .................... 30
10.1.2 Verlustleistung Ex-d Gehäuse ............ 30
10.1.3 Maximale Anzahl der
Anschlussklemmen ........................... 30
10.2 Anordnung v. Bedienelementen
im Gehäuseoberteil ........................... 31
10.3 Anhang Verdrahtungstabellen ............ 36
10.4 Anhang Typenschlüssel ...................... 41
10.5 NPT Gewinde..................................... 42
Konformitätserklärung separat beigelegt.
2
Explosion-protected, light alloy
Ex-d (e) control stations and
distributions, Series: GHG 64
Contents
:
Contents .............................................. 2
1 Technical Data .....................................16
1.1 Ex-d aluminium enclosure ...................16
1.1.1 Permissible power loss Ex-d encl. ......17
1.2.1.1 Main-/Safety switch 80 A ....................18
1.2.1.2 Main-/Safety switch 250 A ..................18
1.2.1.3 Main-/Safety switch 400 A ..................19
1.2.2.3 Mushroom-head p.b.
emergency stop ................................. 20
1.2.2.4 Mushroom-head p.b.
with pull released .............................. 20
1.2.2.5 Mushroom-head p.b.
1.2.2.6 Mushroom-head p.b.
with key release ................................. 21
1.2.4 Main current switch
Main current switch 20 A - 63 A ......... 23
1.2.6 Main current switch operating unit .... 24
6.2 Opening of control station /
for control station / distributions ........ 26
6.4 Montage / Demontage /
Betätigungselemente ........................ 27
6.4.1 Einbau v. Betriebsmittel ..................... 27
6.4.2 Einbau v. Einbauelementen ............... 27
10.1.1 Initial torque Phoenix
line up terminals ................................ 30
10.1.2 Verlustleistung Ex-d Gehäuse ............ 30
10.3 Annex wiring table ............................. 36
10.4 Annex Type code ................................ 41
Declaration of conformity, enclosed separately.