Related Manuals for Ecler VEO-SWH44
Summary of Contents for Ecler VEO-SWH44
-
Page 1: User Manual
VEO-SWH44 SWITCHER HDMI 2.0 4x1 18GPBS Switcher with audio De-Embedder and RS-232 control USER MANUAL... -
Page 2: Table Of Contents
INDEX IMPORTANT REMARK ......................3 IMPORTANT SAFETY INSTRUCTIONS ................3 INTRODUCTION ........................5 PACKAGE CONTENTS ......................5 PANEL DESCRIPTION ......................6 5.1. Front Panel ........................... 6 5.2. Rear Panel ............................ 7 CONNECTION AND INSTALLATION ................. 8 RS-232 CONTROL........................9 APPLICATION DIAGRAM ....................10 TECHNICAL SPECIFICATIONS .................. -
Page 3: Important Remark
1. IMPORTANT REMARK The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. - Page 4 8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. 9. Do not defeat the safety purpose of the polarized or grounding type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong.
-
Page 5: Introduction
HDMI data rate up to 18Gbps, including 4K/UHD@60Hz video resolution with 4:4:4 chroma sampling. The control includes auto-switching feature, front panel buttons, RS- 232 and IR with remote control. VEO-SWH44 is HDCP 2.2 compliant and it guarantees seamless integration for all applications that require latest 4K/UHD and HDR sources and displays. -
Page 6: Panel Description
5. PANEL DESCRIPTION 5.1. Front Panel 1. Source Selection LED Indicators 2. Source Selection Mode Button: Auto/Manual o Press this button for 2 seconds to select auto switching or manual switching mode. Under manual switching mode, press this button normally to select input port. 3. -
Page 7: Rear Panel
5.2. Rear Panel 1. HDMI Output Port 2. HDMI Input Ports 3. Audio De-embedding Output o (Analog 3.5mm Stereo Minijack or Toslink Digital Output using the included adapter) 4. RS-232 port 5. IR Port o Connect the included IR receiver to use IR remote control 6. -
Page 8: Connection And Installation
3. Connect Audio and Control devices if required. 4. Power up VEO-SWH44, display and sources. 5. In order to control VEO-SWH44 using the included IR remote, please connect IR Receiver to the corresponding port. The Remote functions are listed in the... -
Page 9: Rs-232 Control
7. RS-232 CONTROL VEO-SWH44 can be controlled by third party control systems using serial commands through the RS-232 minijack port on the back of the panel. In order to control the device, serial protocol communication parameters need to be set... -
Page 10: Application Diagram
8. APPLICATION DIAGRAM... -
Page 11: Technical Specifications
88.2kHz, 96kHz, 176.4kHz, 192kHz Bitrate up to 24-bit HDMI Distance up to 10 meters (33 feet) with Ecler VEO cables Operating Temperature 0˚C - 40˚C / 32˚F - 104˚F Humidity 20 - 90% RH (no condensation) Power Consumption 2,5W Maximum... - Page 12 NEEC AUDIO BARCELONA S.L. reserves the right to make changes or improvements in the design or manufacturing that may affect these product specifications. Motors, 166‐168 08038 Barcelona ‐ Spain ‐ (+34) 932238403 | information@ecler.com www.ecler.com...