Table of Contents
Advertisement
Safety instructions
The Ozonizer unit is used on the owner's risk.
The ozonizer must not be allowed to fall into water or otherwise come into contact with
water. Do not use the Ozonizer in a flammable or explosive atmosphere.
Airborne ozone can be harmful to health if it enters the respiratory system. The Owner
should therefore take care that only the needed amount of Ozone is produced. The actual
allowed amount of Ozone at working places (MAK) is a maximum of 0.1 ppm (Pieces per
million/ 200 microgram). Ozone can already be detected in 1/5 to 1/10 (0.02 ppm) of that
amount. If excess ozone is produced (ozone odor), the air discharged from the skimmer
should be released into the atmosphere or passed through a residual ozone destructor.
Ensure that enough air passes through the ozone element (min. 75l/h). If this minimum
value is undershot, the ozonizer is at risk of overheating.
Children from the age of 8 years as well as disabled or handicapped persons or persons
with no or small technical experience may use the ozonizer when under surveillance or
after having received a thorough tuition about the use and safety measures.
Children may not play with the ozonizer. Children may do the cleaning and servicing of the
unit only under surveillance.
Do not dismantle the unit under any circumstances. Improper repairs can seriously
endanger the user. If repairs are necessary, please contact a specialist dealer or the
manufacturer directly.
Do not operate the ozonizer if it is damaged. Damaged ozonizers can seriously endanger
the user.
Operate your Sander ozonizer exclusively with the power supply unit type GS60A24-P1J
24V 60W 2.5A enclosed in this package.
The surfaces of the ozone element (7) can be hot. First let the appliance cool down before
starting any cleaning work.
Do not operate the ozonizer if it is damaged. Damaged ozonizers can seriously endanger
the user.
Revision status 23.05.2016
5
Advertisement
Table of Contents
