Introduction; Proper Use In Aquarium And Pond; Designation Of Signs - Sander XT 2000 Instruction Manual

Introduction

Thank you for buying this quality product from Sander! We are confident that you will be satisfied with
this device. You will benefit in every respect from our many years of experience in the manufacture of
aquarium technology.
Please familiarize yourself with the product before using it for the first time. To do so, carefully read
through the instruction manual and safety information. Unpack the ozonizer and check it for shipping
damage. Operate the device only as described below for the specified applications. Keep this
instruction manual in a safe place for future reference. If you give, sell, or lend this device to a third
party, please do not forget to include this instruction manual when you do so.

Proper use in aquarium and pond

The ozonizer has a power rating of 2000 mg ozone/hour (measured in dry air). While used in damp
surrounding air (40 - 80 % air moisture), the ozone performance may be diminished by 50 %.
The ozonizer generates ozone from the air and has been specially developed for aquariums and
ponds. It is important that the ozone is injected into the water at a sufficient depth (at least 20 cm),
which is why we recommend the use of a skimmer in marine water (e.g. our product range
Helgoland). For freshwater applications, we recommend our product range Fresh-Skim.
Other applications of, or modifications to, the ozonizer constitute misuse and entail a risk of personal
injury and/or damage to the device. The manufacturer shall assume no liability for injury/damage
caused by misuse of the device. The device is not intended for commercial use.

Designation of signs

IMPORTANT INFORMATION
ATTENTION, DANGER THROUGH ELECTRICAL ENERGY
ATTENTION! DANGER!
ATTENTION, DANGER THROUGH POISONOUS MATERIAL
ATTENTION, HOT SURFACES
Revision status 23.05.2016
3