Table of Contents
Advertisement
Quick Links
Download this manual
See also:
Instruction Manual
Advertisement
Table of Contents
Related Manuals for Sander XT2000
Summary of Contents for Sander XT2000
- Page 1 Ozonizer XT2000 User Guide...
-
Page 2: Troubleshooting
If the problem persists, please send the ozonizer in for High temperature shutdown inspection at Sander company headquarters If there is insufficient ventilation for cooling or (see address on back cover page). insufficient airflow, both combined with high- level ozone production, the temperature in the ozonizer may exceed its limit (70 °C). - Page 3 Cleansing and maintenance Reassembly to resume operation after cleansing of the ozone generator ⇒ Reattach the ozone generator cover (5), Humidity and dust contamination in the inlet air taking care that the insulating o-ring is cause ozone output to be reduced substantially. seated firmly in its groove.
- Page 4 Using a redox controller 1200 [L/h] During startup, the display (2) briefly shows the Sander logo, and then changes to the main control interface: When using a redox controller, ozone 1200 production is turned off automatically once [L/h] the target redox potential set on the redox controller has been reached.
- Page 5 As a rough guide, use about 10 mg of ozone per in combination with a redox controller (Sander hour for every 100 liters of salt water, or about redox potential detector and controller, part 5 mg of ozone per hour for every 100 liters of number 7.1C).
- Page 6 (connector for 6/8 mm tubing) 2 Display 7 3-pin connector for power supply (24 volts) 3 Cooling fan 8 4-pin connector for Sander Redox Controller 4 Hex-tip (Allen™) screws (with dummy plug) for the ozone generator cover 9 Air inlet for ozone generation...
-
Page 7: Package Contents
Intended use for aquariums and ponds Congratulations on your purchase of this Sander quality product. We are confident The ozonizer is a device for generating ozone that you will be satisfied with this ozonizer. from air. It was developed specifically for use Our many years of experience in aquarium with aquariums and ponds. -
Page 8: Safety Instructions
Excess ozone (eg. from a skimmer’s exhaust) must be released There is a 24-month warranty for all Sander- into the outside air or fed into a residual ozone manufactured ozonizers. During this time, all absorber. -
Page 9: Installation
Installation Connecting the ozonizer for skimmer operation with airstones Wall mount Connect the air inlet (9) to an air pump using 6/8 mm tubing. Connect the ozone outlet (6) to the airstone in the skimmer using ozone- 2000 resistant tubing. Ozone If ozone production is turned off while the ozonizer is still connected to the skimmer, the... - Page 10 For more information, expert advice and orders, please contact us at: +49 51 73 97 10 aqua-sander.de Erwin Sander Elektroapparatebau GmbH Am Osterberg 22 31311 Uetze-Eltze Germany Phone +49 51 73 9 71-0 +49 51 73 9 71-197 E-mail info@aqua-sander.de www.aqua-sander.de © 2/2018 Erwin Sander Elektroapparatebau GmbH Design: ngin.de...
Need help?
Do you have a question about the XT2000 and is the answer not in the manual?
Questions and answers