Disabling the Floppy Controller
Disabling
If you are installing a second SCSI adapter in the system, you
the Floppy
must disable the floppy disk controller on the second SCSI
Controller
adapter. To disable the floppy controller, remove the jumper from
pin number 1 of J6 on the SCSI adapter. Figure 1–1 shows the
default position of the jumper.
Figure 1–1 Disabling the Floppy Controller
Disabling the Floppy Controller
J6
1 2 3 4 5 6
GA_EN00500A_93A
Installing the SCSI Adapter 1–3