Page 2
IMER INTERNATIONAL S.p.A. SYNTESI 140 - 160 - 190 - 250 - 300 - 350 EL FIG.1 POS. Frame Wheel Motor Belt Bowl rotation reduction gear Tank Drive belt guard Arm closure Bowl tipping reduction gear Handwheel Start and stop switch...
Page 3
The SYNTESI 140 concrete mixer has been designed and manufactu- red applying the following harmonised standards: EN 12151:2008; EN 1. The IMER concrete mixer can only work if fitted with all the pro- 12100-1/2:2005; EN 60204-1:2006. tective devices in perfect conditions.
Page 4
IMER INTERNATIONAL S.p.A. SYNTESI 140 - 160 - 190 - 250 - 300 - 350 EL Table 1 - TECHNICAL DATA Model Syntesi 140 Syntesi 160 Syntesi 190 EL Syntesi 250 EL Syntesi 300 EL Syntesi 350 EL Drum capacity...
36.50 Syntesi 160 L 230V 2.2 A All dangerous areas on the IMER concrete mixer have protective casing which must be kept installed at all times and maintained in perfect con- 230 V dition, e.g. the drive belt guard (ref.8 fig.1).
14.3 Tensioning the drive belt If this occurs, it is necessary to replace these brakes with other IMER 1. Switch off the electric motor and disconnect the power plug. spares. 2. Remove the belt guard (ref.A, fig.8) slackening its fastening screws.
IMER INTERNATIONAL S.p.A. SYNTESI 140 - 160 - 190 - 250 - 300 - 350 EL 15. RESIDUAL RISKS AND SAFETY SIGNS 16. TROUBLESHOOTING Though the concrete mixer has been manufactured in full compliance - CAUTION!!! All maintenance operations must be performed...