Product will allow up to 8 masking pins before the actual PIN code (8
digits).
Product will allow up to 9 masking pins before the actual PIN code (7
digits).
Product will allow up to 10 masking pins before the actual PIN code
(6 digits).
Product will allow up to 11 masking pins before the actual PIN code
(5 digits).
Product will allow up to 12 masking pins before the actual PIN code
(4 digits).
10. Emergency Jumpstart
If internal batteries are fully drained or low Battery, user can use a 9V
Battery to stay in contact to 2 conical contact pins (about 12mm
apart) to jumpstart the product.
When that 9V battery contacts with the 9V contact, there will be one
single beep and keypad lights up for user to use any entry methods to
unlock the product.
11. Tamper Alarm
If the main cable between the front panel and back panel is
disconnected, it will trigger the tamper alarm. If the cable is
connected back, it will recover.
12. Manual Relock
Hold on UNLOCK Button for one second to manual relock
Can turn thumbturn or use physical key to physically relock
13. Auto Relock
If Sensor Relock is ON, the lock will relock after the door is closed. If
the lock is unlocked and door is kept closed, the lock will relock after
30 seconds (fixed).
14. Obstruction Alarm
If the lock cannot be fully locked or unlocked, there will be
Obstruction Alarm.
15. Hard Reset and Factory PIN
To hard reset, user needs to hold the CLEAR button and Privacy
lockout button together for 3 seconds.
4