Login For Duofern Transmitters - RADEMACHER RolloTron Basic DuoFern 1200 Translation Of The Original Operating And Assembly Manual

14.1 Login for DuoFern transmitters

1.
+ Activate registering mode.
Simultaneously press and hold the
buttons for 4 seconds.
(green) The indicator light flashes rapidly.
Registering mode remains active for
approx. 60 seconds.
2.
Switch the DuoFern transmitter to registering mode
(please refer to the relevant instruction manual).
3.
Pay attention to the indicator light.
Flashes green
Registering mode is active.
green light (5 seconds)
Login was successful.
red light (5 seconds)
Login failed if:
◆ 20 DuoFern transmitters have already
◆ An attempt was made to register an
80
been registered
unsuitable device (e.g. another
RolloTron Basic DuoFern 1200)
4.
Registering the next DuoFern transmitter.
For this, repeat points 1 to 2 or terminate the registration.
Cancelling the registering process
You can cancel the registering process at any
time by briefly pressing the DuoFern button.
EN