Connecting The Connecting Cable To The Rollotron Basic Duofern 1200 - RADEMACHER RolloTron Basic DuoFern 1200 Translation Of The Original Operating And Assembly Manual

i

9.1 Connecting the connecting cable to the RolloTron Basic DuoFern 1200

1.
Connect the provided connecting cable to the con-
necting terminals of the RolloTron Basic DuoFern 1200.
The colour coding is irrelevant for this connection.
A damaged connecting cable may cause a short
circuit.
◆ Ensure that the connecting cable is laid safely.
◆ The connecting cable muse not be pinched or
damaged when screwing on the RolloTron Basic
DuoFern 1200.
2.
Lay the connecting cable in the cable duct of the
RolloTron Basic DuoFern 1200.
3.
Finally, screw on the traction relief mechanism with
the screws provided.
72
WARNING!
Cable duct Traction relief
EN
Connecting
terminals