Clock/Timer; Setting The Clock; Setting The Timer; Activating And Deactivating Timer - Philips MC-320/19 User Manual

Philips micro hi-fi system mc-320
Hide thumbs Also See for MC-320/19:
Table of Contents

Advertisement

Clock/Timer

Setting the clock

1
In standby, press and hold CLOCK SET /
➜ The clock digits for the hours flash.
2
Press VOLUME –/+ to set the hours.
3
Press CLOCK SET /
➜ The clock digits for the minutes flash.
4
Press VOLUME –/+ to set the minutes.
5
Press CLOCK SET /
Note:
– The backlight for clock display is dim in standby.

Setting the timer

G The system can be used as an alarm clock,
whereby the CD, TUNER or TAPE is switched on
at a set time. The clock time needs to be set first
before the timer can be used.
G You can also use it to record a favourite tuner
programme at a set period (see "Recording
timer")
G During setting, if no button is pressed within 90
seconds, the system will exit timer setting mode
automatically.
1
In standby mode, press TIMER SET /
system for more than 3 seconds.
2
Press SOURCE or VOLUME –/+ to select
sound source.
➜ Display sequence shows CD, TUNER, TAPE or
REC TUN.
18
.
again.
to confirm the time.
on the
3
Press TIMER SET /
mode.
➜ Display sequence scrolls SET ON TIME and
flashes. The clock digits for the hours flash.
4
Press VOLUME –/+ to set the hours.
5
Press TIMER SET /
➜ The clock digits for the minutes flash.
6
Press VOLUME –/+ to set the minutes.
7
Press TIMER SET /
➜ The timer is now set and activated.
Activating and deactivating
TIMER
G In standby or during playback, press
TIMER ON / OFF on the remote control
once.
➜ Display shows
if deactivated.
Activating and deactivating
SLEEP
The sleep timer enables the system to switch off
by itself after a set period of time.
G Press SLEEP on the remote control once or
more.
➜ Display shows SLEEP and one of the sleep
time options in sequence: 90, 80, 70, 60,...,
20,10, OFF, 90. if you have selected a time.
Once SLEEP is activated, SLEEP is display.
G To deactivate, press SLEEP
on the remote control once or
more until OFF is shown, or
press STANDBY ON on the
system or remote control.
➜ OFF is displayed.
to confirm your desired
again.
to confirm the time.
if activated, and disappears

Advertisement

Table of Contents
loading

This manual is also suitable for:

Mc-320Mc-320/21

Table of Contents