Tape Operation / Recording; Tape Playback; Switching Tape Sides; Reverse Mode Options - Philips MC-320/19 User Manual

Philips micro hi-fi system mc-320
Hide thumbs Also See for MC-320/19:
Table of Contents

Advertisement

Tape Operation / Recording

Tape playback

1
Select TAPE source.
2
Press
to open the tape door on the top of the
system.
3
Insert a recorded tape and close the tape door.
G Load the tape with the open side downward
and the full spool to the right.
➜ The display shows TAPE briefly. The tape
counter 0000 display with the
4
Press
to start playback.
5
By pressing
or
possible in both directions.
G During fast winding, you can monitor the tape
message with the tape counter.
To stop the tape, press STOP 9 .
6
G To reset the tape counter, press STOP 9 again.
Note:
– The sound source cannot be changed while
recording a tape.
– "NO TAPE" will be shown if no tape inserted.
16
or
SIDE A
SIDE B
, fast winding of tape is

Switching tape sides

The tape side can be switched manually or
automatically before or during tape playback.
G Press DISPLAY BAND or A/B on remote
control.
➜ The display shows

Reverse mode options

G Press PROG / REV repeatedly to select your
option;
PLAY 1 SIDE
PLAY A AND B
REPEAT A AND B : both sides are played
General information on
recording
G Recording is permissible insofar as copyright or
other rights of third parties are not infringed.
G For recording, use only NORMAL (IEC type I)
tapes on which the tabs have not yet been
broken. This deck is not suited for recording on
.
METAL (IEC IV) type tapes.
G The best recording level is set automatically.
Altering the VOLUME, INCREDIBLE
SURROUND, DBB or INTERACTIVE SOUND
controls will not affect the recording in progress.
G At the very beginning and end of the tape, no
recording will take place during the 7 seconds
when the leader tape passes the recorder heads.
G To protect a tape from accidental erasure, have
the tape in front of you and break out the left
tab. Recording on this side is no longer possible.
If, however, you wish to record over this side
again, cover the tabs with a piece of adhesive
tape.
or
.
SIDE A
SIDE B
: playback or record stops at
the end of the tape.
: both sides are or recorded
played once.
repeatedly, up to 5 times
each side.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Mc-320Mc-320/21

Table of Contents