Electromagnetic Compatibility (Emc) - Axis 291 1U Installation Manual

About This Document
This document describes how to install Axis blade video
servers in the AXIS 291 1U Video Server Rack. Updated
versions of this document will be available on the Axis
Web site.
Intellectual Property Rights -
intellectual property rights relating to technology
embodied in the product described in this document. In
particular, and without limitation, these intellectual
property rights may include one or more of the patents
listed at http://www.axis.com/patent.htm and one or
more additional patents or pending patent applications
in the US and other countries.
Liability -
Every care has been taken in the
preparation of this guide. Please inform your local Axis
office of any inaccuracies or omissions. Axis
Communications AB cannot be held responsible for any
technical or typographical errors and reserves the right
to make changes to the product and manuals without
prior notice. Axis Communications AB makes no
warranty of any kind with regard to the material
contained within this document, including, but not
limited to, the implied warranties of merchantability
and fitness for a particular purpose.
Axis Communications AB shall not be liable nor
responsible for incidental or consequential damages in
connection with the furnishing, performance or use of
this material.
Support Services -
Should you require any technical
assistance, please contact your Axis reseller. If your
questions cannot be answered immediately, your reseller
will forward your queries through the appropriate
channels to ensure a rapid response. If you are
connected to the Internet, you can:
• download user documentation and firmware
updates
• find answers to resolved problems in the FAQ
database. Search by product, category, or
phrases
• report problems to Axis support staff by logging
in to your private support area
Visit the Axis Support Web at www.axis.com/techsup
Please refer to this manual
for the selection of
power cord.
Axis AB has

Electromagnetic Compatibility (EMC)

USA -
This equipment generates, uses, and can radiate
radio frequency energy and if not installed and used in
accordance with the instruction manual, may cause
interference to radio communications. It has been tested
and found to comply with the limits for a Class B
computing device pursuant to Subpart B of Part 15 of
FCC rules, which are designed to provide reasonable
protection against such interference when operated in a
commercial environment. Operation of this equipment
in a residential area is likely to cause interference, in
which case the user at his/her own expense will be
required to take whatever measures may be required to
correct the interference. Shielded cables should be used
with this unit to ensure compliance with the Class B
limits.
Canada -
This Class B digital apparatus complies with
Canadian ICES-003.
Europe -
This digital equipment fulfills the
requirements for radiated emission according to
limit B of EN55022:1998, and the requirements
for immunity according to EN55024:1998 residential,
commercial, and light industry.
Japan -
This is a class B product based on the standard
of the Voluntary Control Council for Interference from
Information Technology Equipment (VCCI). If this is used
near a radio or television receiver in a domestic
environment, it may cause radio interference. Install and
use the equipment according to the instruction manual.
Australia -
This electronic device meets the
requirements of the Radio communications
(Electromagnetic Compatibility) Standard 1998 AS/NZS
3548.
Caution: Risk of electric shock.
Disconnect AC power before
internal service.