7-12
Pin Assignments of the IndraControl VEP
Cable Outlet of the VEP30.2CG
The outlet for the connection cables is situated on the rear side of the
VEP30.2CG device.
Fig. 7-23: Cable outlet of the VEP30.2CG
To guide the cables in a bundle away from the device, it is recommended
to use flexible, divisible corrugated tubes with a nominal width of 23 mm
manufactured by PMA. The tubes are PMA-CO-FLEX PACO corrugated
tubes with the designation PACO-23B.
IndraControl VEP30.2 40.2 and 50.2
VEP302_CG_Kabelabgang.bmp
DOK-SUPPL*-VEP**.2****-PR01-EN-P