Profibus Master Interface Dp-M; Profibus Diagnostic Interface Config; Fig. 7-20: Pin Assignment Of The Profibus Master Interface; Fig. 7-21: Pin Assignment Of The Diagnostic Interface Rs232C - Bosch Rexroth IndraControl VEP .2 Series Project Planning Manual

7-10
Pin Assignments of the IndraControl VEP

PROFIBUS Master Interface DP-M

PROFIBUS Diagnostic Interface Config

This interface is only provided for IndraControl VEP devices with
PROFIBUS configuration.
PIN Signal designation
1 RGND – Reference potential
3 RxD/TxD-P – Transmit/receive
5 DGND – Reference potential
7 NC
9 NC
Fig. 7-20: Pin assignment of the PROFIBUS master interface
PIN Signal designation
1 NC
3 TxD – Transmit Data
5 GND – Signal ground
7 RTS – Ready To Send
9 NC
Fig. 7-21: Pin assignment of the diagnostic interface RS232C
Technical Data PROFIBUS Master Interface
Interface data
Communication interface:
Diagnostic interface:
Fig. 7-22: Technical data PROFIBUS master interface
IndraControl VEP30.2 40.2 and 50.2
PIN Signal designation
2 NC
4 NC
6 VP – Supply voltage plus
8 RxD/TxD-N – Transmit/receive
PIN Signal designation
2 RxD – Receive Data
4 DTR – Data Terminal Ready
6 NC
8 CTS – Clear To Send
PROFIBUS DP, max. 12 Mbauds,
isolated
RS 232C, 9600 bauds
DOK-SUPPL*-VEP**.2****-PR01-EN-P