Creating A Substation Modem In Digsi 4 - Siemens SIPROTEC 4 Manual

Creating a substation modem in DIGSI 4

To achieve a modem connection to a substation, a substation modem with modem driver and
"assigned address" must be created in DIGSI 4.
By double-clicking on the icon
"Modems" in the project, the
substation modem is created with
"New", and a name is allocated by
entering a name under "Name", e.g.
Substation east.
Under "Modem initialisation" nothing
is entered, as the substation modem
was already initialised with the
configuration tool.
Under modem driver the already
installed modem driver is selected as
was the case with the office modem.
The button "Properties ..." of the
modem driver must not be used, as
the dial-up procedure then no longer
functions securely.
NOTE !!! The button „Properties..." must not be used.
The substation modem may only be initialised with the configuration tool.
Note: If the "Properties window" was accidentally opened, it must be closed with Cancel.
The "Assigned address:" is selected from the telephone directory.
When the modems have all been
created, they are listed in the
overview window.
HELP_DIG4_SIP4_ETHERNET_A2.DOC
Seite 19 von 21
Power Transmission and Distribution
Energy Automation
28.11.2005