V-fit-ST Herculean LFG2 Assembly & User Manual page 15

Assembly
Stage C.
9). Lay the Upper Cross Beam (6) onto the 2 assembled Uprights and connect the Front Upright to the Top Cross Beam using
2 x M10 x 55mm Hex Bolts (27), 4 x M10 Flat Washers (38) and 2 x M10 Nylon Locknuts (35).
10). Connect the Rear Upright to the Upper Cross Beam using 2 x M10 x 55mm Hex Bolt (27), 4 x M10 Flat Washers (38) and
2 x M10 Nylon Locknuts (35).
11). Remove the 2 x M10 x 20mm Hex Bolts (25), 2 x M10 Washers (38) from inside the top of the Weight Guide Tubes (21).
Connect the top of the Weight Guide Tubes to the rear of the Upper Cross Beam using the 2 x M10 x 20mm Hex Bolts (25),
2 x M10 Washers (38) previously removed.
25
38
27
38
35
06 38
35
27
Page 15