Reinstatement; Disposal; Maintenance/ Inspection - SORG Boogie Drive Instructions For Use Manual

4 Repairs and maintenance

4.6 Reinstatement

A complete inspection by a qualified specialist dealer must be carried out in accordance with
the checklist prior to reuse. All disinfection measures for reuse must be carried out in accor-
dance with a validated hygiene plan.

4.7 Disposal

The mobile standing device must only be disposed of with the permission of the health insur-
ance company. The mobile standing device must be disposed of in accordance with the applica-
ble national legal regulations.

4.8 Maintenance/ inspection

An inspection must be carried out by your specialist dealer at least once a year for safety rea-
sons and to preserve the product warranty. This must be carried out and documented in accor-
dance with the following checklist.
Maintenance and care checklist (user)
Unsatisfactory or neglected maintenance of the standing trainer poses a
considerable safety risk.
Before each use:
Check:
• that all truss pads are firmly in place,
• the frame, add-on parts and accessories for visible damage, bending, cracks or missing or
loose screws,
• the wheels and quick-release axles for tightness,
• that the inflation pressure and tyre tread are sufficient,
• that the brakes are working properly,
• that the locking mechanisms (springs, quick-release axles, eccentric clamps, etc.) are tight,
• that all previously dismantled components have been reconnected and firmly locked.
Every 3 months:
(or even earlier depending on performance)
Check:
• Screw connections for tightness,
• Welding seams, add-on parts and accessories for hidden damage, bends or cracks,
• Tyre tread.
Thoroughly clean and oil all moving parts.
Please contact your dealer immediately if you notice any defects during maintenance.
Stop using the standing trainer.
2019-08-15 Instructions of use Boogie Drive 27 of 32