Advertisement
Use the correct cable guide for the downtube. There is one specifically for Di2 mounts
and one for mechanical groupsets. Before inserting the cables into the frame, make
sure to guide the cables through the indicated openings of the cable guide.
Start mounting the frameset by placing the bigger 1 1/4" bearing on the fork crown
and the smaller 1 1/8" on the top using assembly grease. Add the compression ring
on top of upper bearing.
14
Continue with the headset cover and the required
amount of spacers. SCOTT offers specific aero-spac-
ers for the Foil available in the following sizes: 2mm,
5mm, 10mm and 20mm. The Foil is delivered with
1x20mm, 2x10mm, 1x5mm and 3x2mm spacers.
Mount the pre-installed Syncros
cockpit on the steerer.
FOIL BUILD UP MANUAL / SCOTT / FOIL / 2016
15
Advertisement
