Advertisement
Install the front derailleur with the Foil-specific
carbon plate. This replaces the original piece that
comes standard with Shimano front derailleurs. The
derailleur hanger will be damaged if the original
Shimano pieces are used.
22
After the front derailleur has been mounted, adjust
the frame stopper bolt so that it sits tightly on the
frame. Without proper adjustment of the stopper
bolt, it is possible that the front derailleur hanger
can be damaged during the shifting process. A
properly adjusted stopper bolt will also improve
shifting performance.
Fit a rubber seal over the Di2 wire and push it firmly into the
hole to finish the front derailleur installation.
To fix the internal Di2 battery on the bot-
tom of the seatpost, place the rubber
seals over the battery with the correct
side facing down.
FOIL BUILD UP MANUAL / SCOTT / FOIL / 2016
23
Advertisement
