Advertisement
Align the cover correctly and fix it with the two bolts. Tighten the bolts to
1-1.5Nm using an Allen key.
12
Slide the installed junction box into the opening of
the cockpit from the front at a 45° angle. Make sure
the button is still placed under the hole of the cover.
Before the rear brake cable is inserted into the frame, make sure
you pre-install cable guides or a shrinking tube in order to hold
together the cable housing and the Di2 wire.
FOIL BUILD UP MANUAL / SCOTT / FOIL / 2016
If you want to equip the Foil with Shimano's Di2 Sprint Shifters
(SW-R610), install them right under the brake levers and connect
the Sprint Shifter wire with the brake lever using the Shimano tool.
13
Advertisement
