Installation Instructions - Hans Grohe Raindance Select S 150/Unica'S Puro 27802 Series Instructions For Use Manual

Safety Notes
Gloves should be worn during installation to prevent
crushing and cutting injuries.
The product may only be used for bathing, hygienic
and body cleaning purposes.
The product may not be used as a holding handle. A
separate handle must be installed.
Shower hoses are only suitable for a connection
from the shower to the fitting. Never fit a shut-off
device between the fitting and the hose.

Installation Instructions

• Prior to installation, inspect the product for transport
damages. After it has been installed, no transport or
surface damage will be honoured.
• The pipes and the fixture must be installed, flushed
and tested as per the applicable standards.
• The plumbing codes applicable in the respective
countries must be observed.
• Thermostatic mixer: Operation / Assembly see en-
closed brochure.
• During installation of the product by qualified trained
personnel, make sure that the entire fastening surface
is even and smooth (no protruding seams or tile
offset), that the finish of the wall is suitable to apply the
product and has no weak points.
• Optimal functioning is only guaranteed with the com-
bination of Hansgrohe hand showers and Hansgrohe
shower hoses.
4
English
Symbol description
Assembly see page 32
Do not use silicone containing acetic acid!
Dimensions (see page 34)
Operation (see page 31)
Cleaning
see enclosed brochure
Spare parts (see page 38)
XXX = Colors
000 = chrome plated
820 = brushed nickel
Special accessories (order as an
extra)
tile-matching-disk #97450XXX
(see page 38)
Test certificate (see page 40)