Connecting The Battery; Connect Batteries; Replace Front Panel - Tripp Lite SMART3000RM2UL Owner's Manual

Connecting the Battery

The UPS is shipped with the battery disconnected. The battery must be connected for the UPS to
operate; this should be done prior to connecting the UPS to AC mains or connecting any
equipment to the UPS. Follow the installation procedure below:
Remove Front Panel.
1

Connect Batteries.

2
Attach the connector as shown: black-to-black
and red-to-red.
Always ensure that the battery terminals
are properly secured.

Replace Front Panel.

3
18-02-242-93378D.indb 4
1
4 x screws
2
3
4 x screws
4
6/11/2018 3:36:46 PM