Advertisement
Quick Links
STAINLESS STEEL PANEL ELEVATOR
AUTOMATIC TONE DIALER
Communication Equipment
& Engineering Company
SERVICE MANUAL
FOR
MODEL SSP-371-D
TELEPHONE
EQUIPPED WITH ATD-11
SSP-371-D-ATD11-ISSUE4.0
Serving the Telephone Industry Since 1930
519 W South Park Street
Okeechobee, FL 34972
Voice: 863-357-0798
Fax: 863-357-0006
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for CEECO SSP-371-D
Summary of Contents for CEECO SSP-371-D
- Page 1 SSP-371-D-ATD11-ISSUE4.0 SERVICE MANUAL MODEL SSP-371-D STAINLESS STEEL PANEL ELEVATOR TELEPHONE EQUIPPED WITH ATD-11 AUTOMATIC TONE DIALER Serving the Telephone Industry Since 1930 Communication Equipment 519 W South Park Street & Engineering Company Okeechobee, FL 34972 Voice: 863-357-0798 Fax: 863-357-0006...
- Page 2 ISSUE 4.0 IMPORTANT INFORMATION CUSTOMER Please fill in before you continue. The following information is necessary when calling CEECO for assistance. MODEL NUMBER MODEL SSP-371-D STAINLESS STEEL PANEL ELEVATOR TELEPHONE EQUIPPED WITH ATD-11 AUTOMATIC TONE DIALER. SERIAL NUMBER DATE MANUFACTURED...
-
Page 3: Table Of Contents
INSTALLATION NOTES AND ASSEMBLY INSTRUCTIONS ..... 7 TESTING......................... 8 SPECIFICATIONS....................9 PARTS LIST ......................10 10.0 FCC NOTICE......................11 11.0 REPAIR AND RETURN INFORMATION............12 12.0 WARRANTY POLICY ..................13 13.0 PROGRAMMING DIAGRAM ................14 CEECO Communication Equipment & Engineering Company PROPRIETARY... -
Page 4: Introduction
GENERAL DESCRIPTION The CEECO Model SSP-371-D Elevator Telephone is a Special Service Telephone designed for elevator installations. The telephone is designed to be installed in recessed mounting locations, and still be attractive and vandal resistant. The telephone is a stainless steel panel-type and can be purchased with an optional mounting box. -
Page 5: Programming
Locate the printed circuit board mounted on the reverse side of the stainless steel panel. It may be necessary to first remove the four security screws (CEECO P/N 301-064 must be used) if the telephone came mounted in the optional mounting box. -
Page 6: Programming Continued
RECOMMENDED TOOLS AND TEST EQUIPMENT Volt/Ohm Meter 1/4∀ Nut Driver Flat Blade Screw Driver Security Tool (sold separately)- CEECO P/N 301-037 CEECO Communication Equipment & Engineering Company PROPRIETARY... -
Page 7: Installation Notes And Assembly Instructions
ISSUE 4.0 INSTALLATION NOTES AND ASSEMBLY INSTRUCTIONS The SSP-371-D is designed to be installed in a recessed mounting location or box with dimensions of approximately 6 7/8∀W x 9 3/4∀H x 3∀D or greater. CEECO part number 371-011 is a mounting box, which is well suited for this purpose. -
Page 8: Testing
When the call is completed, hang up the telephone by returning it to the cradle. From another phone, place a call to the SSP-371-D telephone. Verify that the ringer is working. Lift the handset and check that normal phone conversation is allowed. -
Page 9: Specifications
6 7/8∀W x 9 3/4∀H x 3∀D (handset on hook) MOUNTING: Vertical surface or enclosure mount WEIGHT: Approximately 4 lb. RINGER EQUIVALENCY: 0.8A FCC REGISTRATION NO.: BW-88T7-13717-TE-T UL LISTED NO.: 60F5 TYPE JACK: RJ11C CEECO Communication Equipment & Engineering Company PROPRIETARY... -
Page 10: Parts List
Mounting support bracket 406-019 10-32 x 1/2" Security Screws OPTIONAL 730-103 Model 730-LNB MBTD 371-011 Mounting box 371-012 Frame assembly for mounting box 406-019 10-32 x ½” Security screw (4 req’d) 301-037 Security tool CEECO Communication Equipment & Engineering Company PROPRIETARY... -
Page 11: Fcc Notice
FCC registration number and ringer equivalence number. These numbers are listed in section 7.0 The FCC further requires that you notify your local telephone company when permanently disconnecting this telephone. CEECO Communication Equipment & Engineering Company PROPRIETARY... -
Page 12: Repair And Return Information
11.3 NON-WARRANTY REPAIR CEECO will repair equipment out of warranty for a set charge plus parts. The customer must pay the shipping costs for both directions. 11.4 RETURN FOR CREDIT Material may be returned for credit only with prior approval. Material authorized for return is subject to a 20% restocking charge based on the manufacturer's list price. -
Page 13: Warranty Policy
GOD, or improper operation of equipment. CEECO will repair or replace any unit during this period if found to be defective for reasons other than abuse, neglect, acts of GOD, or improper operation. -
Page 14: Programming Diagram
ISSUE 4.0 13.0 PROGRAMMING DIAGRAM CEECO Communication Equipment & Engineering Company PROPRIETARY... - Page 15 ISSUE 4.0 CEECO Communication Equipment & Engineering Company PROPRIETARY...
Need help?
Do you have a question about the SSP-371-D and is the answer not in the manual?
Questions and answers